IMS USA | (910) 796-2040
How to Accurately Measure Suction Cup Height for IMS ROCK SOLID Pods.
In stone CNC machining, precision in workholding is critical for accurate cutting, polishing, and material stability. Using the wrong suction cup height can lead to:
❌ Uneven work surfaces, affecting cutting accuracy.
❌ Poor vacuum seal, increasing the risk of material shifting.
❌ Misalignment between multiple pods, reducing CNC efficiency.
With IMS ROCK SOLID suction cups, it’s essential to correctly measure and select the right height for your CNC machine setup.
👉 Download the IMS ROCK SOLID Pod Measuring Guide
Step-by-Step Guide: How to Measure Suction Cup Height for Your CNC Machine
Step 1: Secure the Suction Cup to Your CNC Table
✔ Vacuum the pod to the CNC machine table, ensuring a tight seal.
✔ Double-check that the pod is properly aligned to avoid miscalculations.
Pro Tip: Ensure the CNC worktable surface is clean and free of dust or debris for the best vacuum hold.
Step 2: Place the Stone Slab on the Suction Cup
✔ Position the stone slab, quartz, granite, or glass directly on top of the suction cup.
✔ Activate the vacuum system to securely hold the material in place.
Pro Tip: Test the suction strength before measuring to avoid errors caused by shifting material.
Step 3: Measure the Total Height
✔ Use a precision caliper or ruler to measure from:
🔹 The CNC machine table surface (bottom reference point).
🔹 The bottom of the stone slab (top reference point).
✔ Record the measurement (H) – this is your required suction cup height.
Pro Tip: Measure multiple points across the work surface to ensure consistency, especially for large slabs.
Standard IMS ROCK SOLID Suction Cup Heights & Sizes
Most Popular Heights
| Height (H) in mm |
|---|
| 105 mm |
| 150 mm |
| 200 mm |
| 📌 Need a custom height? Contact IMS USA for special configurations! |
Most Popular Suction Cup Sizes
| Rectangle | Square | Round | Sink Rail |
|---|---|---|---|
| 150 x 300 mm | 150 mm | 90 mm | 50 x 400 mm |
| 200 x 400 mm | 200 mm | 120 mm | 30 x 300 mm |
| 250 x 500 mm | 240 mm | 160 mm |
📌 Check out our complete CNC Suction Cup Size Chart
Why IMS ROCK SOLID Suction Cups Are the Best Choice
✔ Precision-engineered aluminum body ensures stability and durability.
✔ Anti-stain rubber seals prevent residue on stone surfaces.
✔ Interchangeable with major CNC machine brands like Intermac, Breton, CMS, Donatoni, and more.
Explore IMS ROCK SOLID Suction Cups
Ensure CNC Accuracy with Proper Suction Cup Height Measurement
By correctly measuring suction cup height, CNC operators can achieve:
✔ More precise cuts with an even work surface.
✔ Better vacuum retention to prevent material movement.
✔ Optimized CNC efficiency, reducing downtime and errors.
Need expert advice on selecting the right suction cup height? Contact IMS USA today!
Download the IMS ROCK SOLID Pod Measuring Guide
📹 Watch our step-by-step video tutorial on suction cup height measurement!